成員 Active Member

We have active researchers from mechanical, electrical, material, chemical, and optical engineering to handle multidisciplinary flexible electronics chanllenges.
我們成員的背景包含了機械、電子、材料、化工及光學等領域,來面對軟性印刷電子的跨領域挑戰
*co-advisory


Cheng-Yao Lo 羅丞曜, chengyao(at)mx.nthu.edu.tw

Received the Ph.D. degree in electrical engineering from The University of Tokyo, Tokyo, Japan, in 2009. During 2001–2005, he was a Senior R&D Process Integration Engineer in Taiwan Semiconductor Manufacturing Company, where he was responsible for the Salicide process integration. During 2006–2009, he was a Visiting Researcher at VTT Technical Research Centre of Finland, where he was responsible for the large-area-printed microelectromechanical systems display project.
Since 2010, he joined National Tsing Hua University as a faculty in both Department of Power Mechanical Engineering and Institute of NanoEngineering and MicroSystems.
His current research interest is flexible printed electronic devices and processes.

Kuan-Hsun Liao 廖冠勛, PhD candidate, s9935804(at)m99.nthu.edu.tw

is working on real-time R2R off-axis monitoring and calibration.
"Thermoresistive Strain Sensor and Positioning Method for Roll-to-Roll Processes", Sensors, Vol. 14, 8082-8095 (2014).
doi:10.3390/s140508082

Chihliang Pan 潘治良, jasonpan1123(at)gmail.com

is working on optical MEMS.

Yu-Wen Chen 陳裕文, n0022057(at)hotmail.com

is working on transparent conducting material.

Chih-Hao An 安智豪, s102328041(at)mail1.ncnu.edu.tw

is working on thermoresistive strain sensing.

Yu-Hao Jen 任聿浩, dickypig99(at)gmail.com

is working on tactile sensor.

Yi-Rui Zhang 張益瑞, charles1198(at)hotmail.com

is working on tactile sensor.

Kuo-Feng Chiu 邱國峰, michael850211(at)gmail.com

is working on isotropic elastomer strain realized by MEMS.

Ting-Jeng Liu 劉廷政, animorphs409(at)gmail.com

is working on automatic optical inspection.

Chia-Tso Mo 磨家佐, george860708(at)gmail.com

is working on (something).

Meng-Jhu Wu 吳孟竹, kchgfofx17(at)gmail.com

is working on (something).

畢業生 Alumni

Shao-Min Hsu 徐紹珉, acekiller0o0o0(at)yahoo.com.tw

"Advanced qualification mehtod for patterns with irregular edges in printed electronics", Flexible and Printed Electronics, Vol. 4, 015001 (2019).
doi:10.1088/2058-8585/aaf311

"印刷電子圖案不規則邊緣之進階量化方法" (Advanced Qualification Methode for Patterns with Irregular Edges in Printed Electronics)
Draft (20190102) Defense (2019XXXX) Thesis (2019XXXX)

Yu-Tang Hu 胡鈺堂, s9933105(at)m99.nthu.edu.tw

"可調變反射式電漿子濾光結構之應變機制優化" (Straining Mechnism Opitmization for Tunable Filter Based on Reflective Surface Plasmon Resonance)
Draft (20180726) Defense (20180726) Thesis (20180816)

Yu-Hong Gao 高宇鴻, 410122003(at)ems.ndhu.edu.tw

"結構剛性於電容式觸覺感測器靈敏度之研究" (Sensitivity Study on Capacitive Tactile Sensors with Various Structural Rigidities)
Draft (20180726) Draft (20180817) Defense (20180726) Thesis (20180823)

Yi-Chu Chen 陳奕竹, jerry7633(at)hotmail.com

"可見光頻譜優劣判斷方法之開發" (Development of Evaluation Method for Visible Spectra)
Draft (20180612) Defense (20180510) Thesis (20180612)

Shih-Chun Lo 羅仕鈞, loshih38(at)gmail.com

"Numerical analysis of a microelectromechanical system-based color filtering device with surface plasmon resonance modulation ", Displays, Vol. 54, 20-27 (2018).
doi:10.1016/j.displa.2018.08.002

"以微機電系統實現表面電漿子共振顯示之理論設計" (Theoretical Design of Surface Plasmon Resonance Display Realized by MEMS)
Defense (20170713) Thesis (20170828)

Li-Wen Wang 王俐雯, lww8277(at)gmail.com

"Morphology and Conductivity Improvement of Metal Mesh Through Roll-to-Roll-Compatible Near-Infrared Sintering", Micro & Nano Letters, Vol. 12, 886-890 (2017).
doi:10.1049/mnl.2017.0418

"大粒徑高黏度奈米金屬粒子塗料之高效燒結技術" (High Efficiency Sintering Techniques for Large and Viscous Metal Nanoparticle Ink)
Defense (20170713) Thesis (20170828)

Shi-Yu Ke 柯詩彧*, dkgm8117(at)yahoo.com.tw

"一種改善空間解析度/靈敏度之電容式觸覺感測器研究" (A New Capacitive Tactile Sensor for Enhancing Spatial Resolution and Sensitivity)
Defense (20170721) Thesis (20170905)

Sheng-Feng Lin 林聖峰*, 2016, Ph. D.

"Near-Infrared Imaging System for Nondestructive Inspection of Micro-Crack in Wafer Through Dicing Tape", Applied Optics, Vol. 54, E123-E128 (2015).
doi:10.1364/AO.54.00E123

Bo-Cin Huang 黃柏欽, 2016, master

"Inkjet-Patterned Porous Split-Ring Resonator and Its Performance Study on Metamaterial Application", Journal of Micromechanics and Microengineering, Vol. 28, 095012 (2018).
doi:10.1088/1361-6439/aac669
"Mechanical Stress-Controlled Tunable Active Frequency-Selective Surface ", Applied Physics Letters, Vol. 110, 044101 (2017).
doi:10.1063/1.4974853
"Methodology for Evaluating Pattern Transfer Completeness in Inkjet Printing with Irregular Edges", Journal of Micromechanics and Microengineering, Vol. 26, 065009 (2016).
doi:10.1088/0960-1317/26/6/065009

"噴印二維圖樣之完整性量化手法" (Quantification Methodology for 2D Inkjet-Printed Patterns)
Defense (20160706) Thesis (20160728)

Mochtar Chandra 劉建豪, 2016, master

"Vertically Stacked Capacitive Tactile Sensor with More Than Quadrupled Spatial Resolution Enhancement from Planar Arrangement", Sensors and Actuators A: Physical, Vol. 263, 386-390 (2017).
doi:10.1016/j.sna.2017.07.004
"Doubling the Spatial Resolution in Capacitive Tactile Sensors", Journal of Micro/Nanolithography, MEMS and MOEMS, Vol. 16, 035001 (2017).
doi:10.1117/1.JMM.16.3.035001

"電容式觸覺感測器之空間解析度優化" (Spatial Resolution Enhancement for Capacitive Tactile Sensor)
Defense (20160706) Thesis (20160628)

Jian-Wei Hong 洪建瑋, 2015, master

"Critical dimension and pattern size enhancement using pre-strained lithography", Applied Physics Letters, Vol. 105, 154103 (2014).
doi:10.1063/1.4898572

Chin-Yen Lin 林勁言, 2015, master

"Structure Compensation and Illumination Uniformity Improvement Through Inkjet Printing in Organic Light-Emitting Diode Subpixels ", Journal of Vacuuum Science & Technology B, Vol. 35, 020601 (2017).
doi:10.1116/1.49749323

Hui-Ju Chan 詹慧如, 2015, master

"Porosity Reduction in Inkjet-Printed Copper Film by Progressive Sintering on Nanoparticles", Thin Solid Films, Vol. 627, 33-38 (2017).
doi:10.1016/j.tsf.2017.02.062

Tsun-Yi Chen 陳尊義*, 2014, Ph. D.

"Friction-Assisted Pulling Force Detection Mechanism for Tactile Sensors", Journal of Microelectromechanical Systems, Vol. 23, pp. 471-481 (2014).
doi:10.1109/JMEMS.2013.2280149

Shi-Te Chuang 莊士德*, 2014, master

"Capacitive Tactile Sensor with Asymmetric Electrodes for Angle-Detection-Error Alleviation", Sensors and Actuators A: Physical, Vol. 250, 159-169 (2016).
doi:doi:10.1016/j.sna.2016.09.022

Michal Stach 賀米昊, 2013, master

"Enlarging a Post-Lithography Pattern Modification Process Window with a Poisson’s Ratio-Matching Inter-Layer", Microelectronic Engineering, Vol. 127, pp. 97-101 (2014).
doi:10.1016/j.mee.2014.05.024
"Post-Lithography Pattern Modification and Its Applicationto a Tunable Wire Grid Polarizer ", Nanotechnology, Vol. 24, 115306 (2013).
doi:10.1088/0957-4484/24/11/115306

Chung-Yuan Yang 楊仲元, 2013, master

Yi-Chen Chung 鍾易辰*, 2013, master

"Capacitive Tactile Sensor for Angle Detection and Its Accuracy Study", IEEE Sensors Journal, Vol. 16, 6857-6865 (2016).
doi:10.1109/JSEN.2016.2583544

Yu-Han Chien 簡于涵*, 2012, master

Shen-An Kuo 郭勝安, 2012, master

"A High Sensitivity Three-Dimensional-Shape Sensing Patch Prepared by Lithography and Inkjet Printing ", Sensors, Vol.12, 4172-4186 (2012) .
doi:10.3390/s120404172
"Zero Power Consumption Visual Curvature Sensor by Flexible Interferometer", Sensors and Actuators A: Physical, Vol. 169, 295-300 (2011) .
doi:10.1016/j.sna.2011.03.026

Yung-Chen Wang 王詠辰*, 2011, master

"Mutual Capacitive Flexible Tactile Sensor for 3-D Image Control", Journal of Microelectromechanical Systems, Vol.22, 804-814 (2013).
doi:10.1109/JMEMS.2013.2245402