研究
Some recent achivements are briefed here
(co-advisory inclusive). For complete list, see attached file.
這裡簡單地介紹了我們(含共同指導)近期已發表的部分研究成果，完整著作或發表清單則添附於後。
Publication
list 完整清單
Novel Response Acquisition Method for Enhancing Spatial Resolution in Capacitive Tactile Sensing Array
Shi-Yu Ke, Yu-Wen Chen, and Cheng-Yao Lo
IEEE Sensors Journal, Vol. 21, 5895-5903 (2021)
doi.org/10.1109/JSEN.2020.3043465
Development and Characterization of Vertically Stacked Tactile Sensor With Hollow Structure
Yu-Hao Jen, Chia-Tso Mo, Yu-Wen Chen,
Emile Martincic, Daisuke Yamane, Tso-Fu Mark Chang , Masato Sone,and
Cheng-Yao Lo
IEEE Sensors Journal, Vol. 21, 5809-5818 (2021)
doi.org/10.1109/JSEN.2020.3037261
Machine learning-based off-line electrical characteristic prediction through in-line pattern integrity inspection
Ting-Jeng Liu, Meng-Jhu Wu, and Cheng-Yao
Lo
Journal of Micromechanics and Microengineering, Vol. 31, 015005 (2021)
doi.org/10.1088/1361-6439/abc96c
Linear strain maximization in MEMS-elastomer hybrid configurations for isotropic electromagnetic modulations in stretchable electronics
Kuo-Feng Chiu, Subodh Kumar, Yu-Wen Chen,
and Cheng-Yao Lo
Displays, Vol. 64, 101963 (2020)
doi.org/10.1016/j.displa.2020.101963
Realization of multistage detection sensitivity and dynamic range in capacitive tactile sensors
Yi-Rui Zhang, Yu-Hao Jen, Chia-Tso Mo,
Yu-Wen Chen, Mohammed Al-Romaithy, Emile Martincic, and Cheng-Yao Lo
IEEE Sensors Journal, Vol. 20, 9724-9732 (2020)
doi.org/10.1109/JSEN.2020.2992484
Efficient and improved qualification method for patterns with irregular edges in printed electronics
Ting-Jeng Liu, Shao-Min Hsu, Meng-Jhu Wu,
Pavel Ianko, and Cheng-Yao Lo
Journal of Micromechanics and Microengineering, Vol. 29, 124005 (2019)
doi.org/10.1088/1361-6439/ab4ed7
Strain sensor with low thermal conductivity concealing resin for enhanced detection sensitivity and improved spatial resolution
Chi-Hao An, Kuan-Hsun Liao, and Cheng-Yao
Lo
Journal of Micromechanics and Microengineering, Vol. 29, 124001 (2019)
doi.org/10.1088/1361-6439/ab45d0
Surface plasmon resonance manipulation through application of mechanically generated planar and linear strain
Yu-Tang Hu, Kuo-Feng Chiu, Andrei
Vladimirovich Vasenin, Markéta Florianová, and
Cheng-Yao Lo
Applied Physics Express, Vol. 12, 096504 (2019)
doi.org/10.7567/1882-0786/ab3948
Five-fold sensitivity enhancement in a capacitive tactile sensor by reducing material and structural rigidity
Yu-Hong Gao, Yu-Hao Jen, Rongshun Chen,
Kean Aw, Daisuke Yamane, Cheng-Yao Lo
Sensors and Actuators A: Physical, Vol. 293, 167-177 (2019)
doi.org/10.1016/j.sna.2019.04.043
An integrated method based on energy concentration for evaluating normally distributed spectra in the visible region
Yu-Tang Hu,Yi-Chu Chen, Andrei
Vladimirovich Vasenin,
Markéta Florianová, Kuo-Feng Chiu, Chih-Liang
Pan,
Cheng-Yao Lo
Displays, Vol. 57, 7-17 (2019)
doi.org/10.1016/j.displa.2019.02.002
Continuous inkjet-patterned and flashlight-sintered strain sensor for in-line off-axis detection in roll-to-roll manufacturing
Kuan-Hsun Liao, Chih-Hao An, and Cheng-Yao
Lo
Mechatronics, Vol. 59, 95-103 (2019)
doi:10.1016/j.mechatronics.2019.03.006
Advanced qualification method for patterns with irregular edges in printed electronics
Shao-Min Hsu and Cheng-Yao Lo
Flexible and Printed Electronics, Vol. 4, 015001 (2019)
doi:10.1088/2058-8585/aaf311
Numerical analysis of a microelectromechanical system-based color filtering device with surface plasmon resonance modulation
Shi-Chun Lo, Yu-Tang Hu, Chih-Liang Pan,
and Cheng-Yao Lo
Displays, Vol. 54, 20-27 (2018)
doi:10.1016/j.displa.2018.08.002
Inkjet-Patterned Porous Split-Ring Resonator and Its Performance Study on Metamaterial Application
Bo-Cin Huang and Cheng-Yao Lo
Journal of Micromechanics and Microengineering, Vol. 28, 095012 (2018)
doi:10.1088/1361-6439/aac669
Morphology and Conductivity Improvement of Metal Mesh Through Roll-to-Roll-Compatible Near-Infrared Sintering
Li-Wen Wang and Cheng-Yao Lo
Micro & Nano Letters, Vol. 12, 886-890 (2017)
doi:10.1049/mnl.2017.0418
Doubling the Spatial Resolution in Capacitive Tactile Sensors
Mochtar Chandra, Shi-Yu Ke, Rongshun
Chen, and Cheng-Yao Lo
Journal of Micro/Nanolithogrpahy, MEMS, and MOEMS, Vol. 16, 035001
(2017)
doi:10.1117/1.JMM.16.3.035001
Vertically Stacked Capacitive Tactile Sensor with More Than Quadrupled Spatial Resolution Enhancement from Planar Arrangement
Mochtar Chandra, Shi-Yu Ke, Rongshun
Chen, and Cheng-Yao Lo
Sensors and Actuators A: Physical, Vol. 263, 386-390 (2017)
doi:10.1016/j.sna.2017.07.004
Porosity Reduction in Inkjet-Printed Copper Film by Progressive Sintering on Nanoparticles
Hui-Ju Chan, Bo-Cin Huang, Li-Wen Wang,
Kuan-Hsun Liao, and Cheng-Yao Lo
Thin Solid Films, Vol. 627, 33-38 (2017)
doi:10.1016/j.tsf.2017.02.062
Structure Compensation and Illumination Uniformity Improvement Through Inkjet Printing in Organic Light-Emitting Diode Subpixels
Chin-Yen Lin, Li-Wen Wang, Kuan-Hsun Liao,
and Cheng-Yao
Lo
Journal of Vacuuum Science & Technology B, Vol. 35, 020601
(2017)
doi:10.1116/1.49749323
Mechanical Stress-Controlled Tunable Active Frequency-Selective Surface
Bo-Cin Huang, Jian-Wei Hong, and Cheng-Yao
Lo
Applied Physics Letters, Vol. 110, 044101 (2017)
doi:10.1063/1.4974853
Capacitive Tactile Sensor with Asymmetric Electrodes for Angle-Detection-Error Alleviation
Shi-Te Chuang, Mochtar Chandra, Rongshun
Chen, and Cheng-Yao
Sensors and Actuators A: Physical, Vol. 250, 159-169 (2016)
doi:10.1016/j.sna.2016.09.022
Capacitive Tactile Sensor for Angle Detection and Its Accuracy Study
Yi-Chen Chung, Shi-Te Chuang, Tsun-Yi
Chen, Cheng-Yao Lo, and Rongshun Chen
IEEE Sensors Journal, Vol. 16, 6857-6865 (2016)
doi:10.1109/JSEN.2016.2583544
Methodology for Evaluating Pattern Transfer Completeness in Inkjet Printing with Irregular Edges
Bo-Cin Huang, Hui-Ju Chan, Jian-Wei Hong,
and Cheng-Yao Lo
Journal of Micromechanics and Microengineering, Vol. 26, 065009 (2016)
doi:10.1088/0960-1317/26/6/065009
Near-Infrared Imaging System for Nondestructive Inspection of Micro-Crack in Wafer through Dicing Tape
S. -F. Lin, C. -H. Chen, and C. -Y. Lo
Applied Optics, Vol. 54, E123-E128 (2015)
doi:10.1364/AO.54.00E123
Critical Dimension and Pattern Size Enhancement Using Pre-Strained Lithography
Jian-Wei Hong, Chung-Yuan Yang, and
Cheng-Yao Lo
Applied Physics Letters, Vol. 105, 154103 (2014)
doi:10.1063/1.4898572
Enlarging a Post-Lithography Pattern Modification Process Window with a Poisson’s Ratio-Matching Inter-Layer
En-Chiang Chang, Michal Stach,Chung-Yuan
Yang, Chien-Chung Fu, and Cheng-Yao Lo
Microelectronic Engineering, Vol. 127, pp. 97-101 (2014)
doi:10.1016/j.mee.2014.05.024
Thermoresistive Strain Sensor and Positioning Method for Roll-to-Roll Processes
Kuan-Hsun Liao and Cheng-Yao Lo
Sensors, Vol. 14, pp. 8082-8095 (2014)
doi:10.3390/s140508082
Friction-Assisted Pulling Force Detection Mechanism for Tactile Sensors
Tsun-Yi Chen, Yung-Chen Wang,Cheng-Yao Lo,
and Rongshun Chen
Journal of Microelectromechanical Systems, Vol. 23, pp. 471-481(2014)
doi:10.1109/JMEMS.2013.2280149
Mutual Capacitive Flexible Tactile Sensor for 3-D Image Control
Yung-Chen Wang, Tsun-Yi Chen,Rongshun
Chen, and Cheng-Yao Lo
Journal of Microelectromechanical Systems, Vol. 22, pp. 804-814(2013)
doi:10.1109/JMEMS.2013.2245402
Post-Lithography Pattern Modification and Its Applicationto a Tunable Wire Grid Polarizer
Michal Stach, En-Chiang Chang, Chung-Yuan
Yang, and Cheng-Yao Lo
Nanotechnology, Vol. 24, 115306 (2013)
doi:10.1088/0957-4484/24/11/115306